Fasteners Nut Bolt Weight Calculator, Check bolt weight calculator in mm, bolt weight calculator in kg, hex bolt weight calculator, foundation bolt weight calculator in kg, ss bolt weight calculator, nut weight calculator in kg. Screws Weight Chart. WEIGHTS MACHINE SCREWS & Type 1, 23, F and G TAPPING SCREWS LBS. Per 1000 pieces; DIAMETERS. DIN 610 Bolts Dimensions, DIN610 Hex Fit Bolts Weight Chart & DIN 610 Bolts Material Specification & Tolerances / 610 Bolts Specifications / DIN 610 Bolts Manufacturer & Suppliers Mumbai, India DIN 610 Specifications. DIN610 Hex Fit Bolt - Product drawing - L=length,k=head height,b=thread length, d= dia.,s= Width A/F, e=Width A/C.
See Full List On Portlandbolt.com
Description
This section is from the book 'Notes On Construction In Mild Steel', by Henry Fidler. Also available from Amazon: Notes On Construction In Mild Steel.
The following table of the weights of mild-steel bolts and nuts may be found useful in the process of estimating weights of steel-work and fastenings.
Metric Nut Weight
The heads and nuts are hexagonal, of the usual Whitworth standard size; that is, the depth of the head is seven-eighths of the diameter of the bolt, and the depth of the nut is equal to the diameter. The dimensions of the head and nut across the flats or over the angles of the hexagon are those usually given in the published tables of sizes of Whitworth standard.
Any departure from the above proportions of head and nut will of course modify to some extent the weights given in the tables.
The table may also be used for the calculation of weights of similar bolts in other materials than mild steel by proportioning in the ratio of the specific gravities of the material used.
The length of the bolt is in all cases measured from under head to point, and the lengths have been extended to 30 inches in the table to meet the ordinary cases of long bolts used in the connection of heavy timber framing. For longer bolts, such as foundation bolts and the like, special calculations must be made, using the values of the weight of heads and nuts given at the head of the table.
The weight of washers is not included, and must be allowed for separately.
Table No. 32. The Weight Of Mild Steel Bolts And Nuts In Pounds Per Hundred. Hexagon Heads And Nuts
Diameter of bolt. | ¼' | 5/16' | ⅜' | 7/16' | ½' | 9/16' | ⅝' | ¾' | ⅞' |
Weight of bead and nut together per hundred. | 2.83 | 4.48 | 7.53 | 11.71 | 16.61 | 22.82 | 29.4 | 49.7 | 74.5 |
Length in inches under head to point | Weight of bolts and nuts in pounds per hundred. | ||||||||
1' | 4.22 | 6.65 | 10.6 | 16.0 | 22.2 | 29.9 | 38.1 | 62.2 | |
1¼' | 4.57 | 7.19 | 11.4 | 17.0 | 23.5 | 31.6 | 40.3 | 65.3 | |
1½ | 4.92 | 7.73 | 12.2 | 18.1 | 24.9 | 33.4 | 42.4 | 68.5 | 100 |
1¾' | 5.27 | 8.28 | 13.0 | 19.1 | 26.3 | 35.1 | 44.6 | 71.6 | 104 |
2' | 5.61 | 8.83 | 13.8 | 20.2 | 27.7 | 36.9 | 46.8 | 74.7 | 108 |
2¼' | 5.96 | 9.37 | 14.5 | 21.3 | 29.1 | 38.7 | 49.0 | 77.9 | 113 |
2¾' | 6.30 | 9.91 | 15.3 | 22.3 | 30.5 | 40.4 | 51.1 | 81.0 | 117 |
2¾' | 6.65 | 10.45 | 161 | 23.4 | 31.9 | 42.2 | 53.3 | 84.1 | 121 |
3' | 7.00 | 10.99 | 16.9 | 24.5 | 33.3 | 43.9 | 55.5 | 87.2 | 125 |
3¼' | 7.35 | 11.53 | 17.7 | 25.5 | 34.7 | 45.7 | 57.6 | 90.4 | 130 |
3½' | 7.70 | 12.08 | 18.5 | 26.6 | 36.1 | 47.5 | 59.8 | 93.5 | 134 |
3¾' | 8.05 | 12.63 | 19.3 | 27.7 | 37.5 | 49.2 | 62.0 | 96.6 | 138 |
4' | 8.39 | 13.18 | 20.1 | 28.7 | 38.9 | 51.0 | 64.2 | 99.7 | 142 |
4¼' | 8.74 | 13.72 | 20.8 | 29.8 | 40.2 | 52.7 | 66.3 | 102.9 | 147 |
4½' | 9.09 | 14.26 | 21.6 | 30.9 | 41.6 | 54.5 | 68.5 | 106.0 | 151 |
4¾' | 9.44 | 14.80 | 22.4 | 31.9 | 43.0 | 56.2 | 70.7 | 109.0 | 155 |
5' | 9.78 | 15.35 | 23.2 | 33.0 | 44.4 | 58.0 | 72.8 | 112.0 | 160 |
5¼' | 10.13 | 15.89 | 24.0 | 34.1 | 45.8 | 59.8 | 75.0 | 115.0 | 164 |
4' | 10.48 | 16.43 | 24.8 | 35.1 | 47.2 | 61.5 | 77.1 | 118.0 | 168 |
5¾' | 10.83 | 16.98 | 25.5 | 36.2 | 48.6 | 63.3 | 79.3 | 121.0 | 172 |
6' | 11.18 | 17.53 | 26.3 | 37.2 | 50.0 | 65.1 | 81.5 | 125.0 | 177 |
6¼' | 11.53 | 18.07 | 27.1 | 38.3 | 51.4 | 66.8 | 83.7 | 128.0 | 181 |
6½' | 11.88 | 18.61 | 27.9 | 39.4 | 52.8 | 68.6 | 85.9 | 131.0 | 185 |
6¾' | 12.22 | 19.15 | 28.7 | 40.4 | 54.2 | 70.3 | 88.0 | 134.0 | 189 |
7' | 12.56 | 19.70 | 29.5 | 41.5 | 55.6 | 72.1 | 90.2 | 137.0 | 194 |
7¼' | 12.91 | 20.24 | 30.2 | 42.6 | 57.0 | 73.9 | 92.4 | 140.0 | 198 |
7½' | 13.26 | 20.78 | 31.0 | 43.6 | 58.4 | 75.6 | 94.6 | 143.0 | 202 |
7¾' | 13.60 | 21.33 | 31.8 | 44.7 | 59.7 | 77.4 | 96.7 | 147.0 | 206 |
8' | 13.95 | 21.88 | 32.6 | 45.7 | 61.1 | 79.1 | 98.9 | 150.0 | 211 |
8¼' | 14.30 | 22.42 | 33.4 | 46.8 | 62.5 | 80.9 | 101.0 | 153.0 | 215 |
8½' | 14.65 | 22.96 | 34.1 | 47.9 | 63.9 | 82.7 | 103.0 | 156.0 | 219 |
8¾' | 15.00 | 23.50 | 34.9 | 48.9 | 65.3 | 84.4 | 105.0 | 159.0 | 223 |
Diameter off bolt. | ¼' | 5/16' | ⅜' | 7/16' | ½' | 9/16' | ⅝' | ¾' | ⅞' |
Weight of head and nut together per hundred. | 2.83 | 4.48 | 7.53 | 11.71 | 16.61 | 22.82 | 29.4 | 49.7 | 74.5 |
Length in inches under head to point. | Weight of bolts and nuts in pounds per hundred. | ||||||||
9' | 15.34 | 24.05 | 35.7 | 50.0 | 66.7 | 86.2 | 108.0 | 162.0 | 228 |
9¼' | 15.69 | 24.59 | 36.5 | 51.1 | 68.1 | 87.9 | 110.0 | 165.0 | 232 |
9½' | 16.04 | 25.13 | 37.3 | 52.1 | 69.5 | 89.7 | 112.0 | 168.0 | 236 |
9¾' | 1639 | 25.67 | 38.1 | 53.2 | 70.9 | 91.5 | 114.0 | 172.0 | 240 |
10' | 16.73 | 26.22 | 38.9 | 54.3 | 72.3 | 93.2 | 116.0 | 175.0 | 245 |
10¼' | 17.08 | 26.77 | 39.6 | 55.3 | 73.7 | 95.0 | 118.0 | 178.0 | 249 |
10½' | 17.43 | 27.32 | 40.4 | 56.4 | 75.0 | 96.7 | 120.0 | 181.0 | 253 |
10¾' | 17.78 | 27.86 | 41.2 | 57.5 | 76.4 | 98.5 | 123.0 | 184.0 | 258 |
11' | 18.13 | 28.40 | 42.0 | 58.5 | 77.8 | 100.3 | 125.0 | 187.0 | 262 |
11¼' | 18.48 | 28.94 | 42.8 | 59.6 | 79.2 | 102.0 | 127.0 | 190.0 | 266 |
11½' | 18.83 | 29.48 | 435 | 60.7 | 80.6 | 103.8 | 130.0 | 193.0 | 270 |
11¾' | 19.18 | 30.03 | 44.3 | 617 | 82.0 | 105.5 | 132.0 | 197.0 | 275 |
12' | 19.53 | 30.58 | 45.1 | 62.8 | 83.4 | 107.3 | 134.0 | 200.0 | 279 |
13' | 20.92 | 32.75 | 48.3 | 67.1 | 89.0 | 114.4 | 142.0 | 212.0 | 296 |
14' | 22.31 | 34.92 | 51.4 | 71.3 | 94.5 | 121.4 | 151.0 | 225.0 | 313 |
15' | 23.70 | 37.09 | 54.5 | 75.6 | 100.1 | 128.4 | 160.0 | 237.0 | 330 |
16' | 25.09 | 39.26 | 57.6 | 79.8 | 105.7 | 135.5 | 168.0 | 250.0 | 347 |
17' | 26.48 | 41.43 | 60.8 | 84.1 | 111.3 | 142.5 | 177.0 | 262.0 | 364 |
18' | 27.87 | 43.60 | 63.9 | 88.3 | 116.8 | 149.5 | 186.0 | 275.0 | 381 |
19' | • • • | • • . | 67.1 | 92.6 | 122.4 | 156.6 | 194.0 | 287.0 | 398 |
20' | • • • | • . • | 70.2 | 96.8 | 127.9 | 163.6 | 203.0 | 300.0 | 415 |
21' | • • • | • • • | 73.3 | 101.1 | 133.5 | 1706 | 212.0 | 312.0 | 432 |
22' | • • • | • • • | 76.4 | 105.3 | 139.1 | 177.7 | 220.0 | 325.0 | 449 |
23' | • • • | • • • | 79.6 | 109.6 | 144.6 | 184.7 | 229.0 | 337.0 | 466 |
24' | • * • | • • • | 82.7 | 113.9 | 150.2 | 191.8 | 238.0 | 350.0 | 483 |
25' | • • • | • • | • • • | • • • | ... | •• | • ... | 363.0 | 500 |
26' | • • • | • • • | • • • | ... | • • • | • • • | • • • | 375.0 | 517 |
27' | • • • | • • • | • . • | ... | • • • | • • • | • * • | 388.0 | 534 |
28' | • • • | • • • | ... | • • • | • • • | • • • | • • • | 400.0 | 551 |
29' | • • • | • • | ... | ... | • • • | • • | . • • | 413.0 | 568 |
30' | ... | ... | ... | •• . | ... | ... | • • • | 425.0 | 585 |
Table Of The Weight Of Mild Steel Bolts And Nuts In Pounds Per Hundred. Hexagon Heads And Nuts
Hex Bolt Weight Chart
Metric Nut Weight
The heads and nuts are hexagonal, of the usual Whitworth standard size; that is, the depth of the head is seven-eighths of the diameter of the bolt, and the depth of the nut is equal to the diameter. The dimensions of the head and nut across the flats or over the angles of the hexagon are those usually given in the published tables of sizes of Whitworth standard.
Any departure from the above proportions of head and nut will of course modify to some extent the weights given in the tables.
The table may also be used for the calculation of weights of similar bolts in other materials than mild steel by proportioning in the ratio of the specific gravities of the material used.
The length of the bolt is in all cases measured from under head to point, and the lengths have been extended to 30 inches in the table to meet the ordinary cases of long bolts used in the connection of heavy timber framing. For longer bolts, such as foundation bolts and the like, special calculations must be made, using the values of the weight of heads and nuts given at the head of the table.
The weight of washers is not included, and must be allowed for separately.
Table No. 32. The Weight Of Mild Steel Bolts And Nuts In Pounds Per Hundred. Hexagon Heads And Nuts
Diameter of bolt. | ¼' | 5/16' | ⅜' | 7/16' | ½' | 9/16' | ⅝' | ¾' | ⅞' |
Weight of bead and nut together per hundred. | 2.83 | 4.48 | 7.53 | 11.71 | 16.61 | 22.82 | 29.4 | 49.7 | 74.5 |
Length in inches under head to point | Weight of bolts and nuts in pounds per hundred. | ||||||||
1' | 4.22 | 6.65 | 10.6 | 16.0 | 22.2 | 29.9 | 38.1 | 62.2 | |
1¼' | 4.57 | 7.19 | 11.4 | 17.0 | 23.5 | 31.6 | 40.3 | 65.3 | |
1½ | 4.92 | 7.73 | 12.2 | 18.1 | 24.9 | 33.4 | 42.4 | 68.5 | 100 |
1¾' | 5.27 | 8.28 | 13.0 | 19.1 | 26.3 | 35.1 | 44.6 | 71.6 | 104 |
2' | 5.61 | 8.83 | 13.8 | 20.2 | 27.7 | 36.9 | 46.8 | 74.7 | 108 |
2¼' | 5.96 | 9.37 | 14.5 | 21.3 | 29.1 | 38.7 | 49.0 | 77.9 | 113 |
2¾' | 6.30 | 9.91 | 15.3 | 22.3 | 30.5 | 40.4 | 51.1 | 81.0 | 117 |
2¾' | 6.65 | 10.45 | 161 | 23.4 | 31.9 | 42.2 | 53.3 | 84.1 | 121 |
3' | 7.00 | 10.99 | 16.9 | 24.5 | 33.3 | 43.9 | 55.5 | 87.2 | 125 |
3¼' | 7.35 | 11.53 | 17.7 | 25.5 | 34.7 | 45.7 | 57.6 | 90.4 | 130 |
3½' | 7.70 | 12.08 | 18.5 | 26.6 | 36.1 | 47.5 | 59.8 | 93.5 | 134 |
3¾' | 8.05 | 12.63 | 19.3 | 27.7 | 37.5 | 49.2 | 62.0 | 96.6 | 138 |
4' | 8.39 | 13.18 | 20.1 | 28.7 | 38.9 | 51.0 | 64.2 | 99.7 | 142 |
4¼' | 8.74 | 13.72 | 20.8 | 29.8 | 40.2 | 52.7 | 66.3 | 102.9 | 147 |
4½' | 9.09 | 14.26 | 21.6 | 30.9 | 41.6 | 54.5 | 68.5 | 106.0 | 151 |
4¾' | 9.44 | 14.80 | 22.4 | 31.9 | 43.0 | 56.2 | 70.7 | 109.0 | 155 |
5' | 9.78 | 15.35 | 23.2 | 33.0 | 44.4 | 58.0 | 72.8 | 112.0 | 160 |
5¼' | 10.13 | 15.89 | 24.0 | 34.1 | 45.8 | 59.8 | 75.0 | 115.0 | 164 |
4' | 10.48 | 16.43 | 24.8 | 35.1 | 47.2 | 61.5 | 77.1 | 118.0 | 168 |
5¾' | 10.83 | 16.98 | 25.5 | 36.2 | 48.6 | 63.3 | 79.3 | 121.0 | 172 |
6' | 11.18 | 17.53 | 26.3 | 37.2 | 50.0 | 65.1 | 81.5 | 125.0 | 177 |
6¼' | 11.53 | 18.07 | 27.1 | 38.3 | 51.4 | 66.8 | 83.7 | 128.0 | 181 |
6½' | 11.88 | 18.61 | 27.9 | 39.4 | 52.8 | 68.6 | 85.9 | 131.0 | 185 |
6¾' | 12.22 | 19.15 | 28.7 | 40.4 | 54.2 | 70.3 | 88.0 | 134.0 | 189 |
7' | 12.56 | 19.70 | 29.5 | 41.5 | 55.6 | 72.1 | 90.2 | 137.0 | 194 |
7¼' | 12.91 | 20.24 | 30.2 | 42.6 | 57.0 | 73.9 | 92.4 | 140.0 | 198 |
7½' | 13.26 | 20.78 | 31.0 | 43.6 | 58.4 | 75.6 | 94.6 | 143.0 | 202 |
7¾' | 13.60 | 21.33 | 31.8 | 44.7 | 59.7 | 77.4 | 96.7 | 147.0 | 206 |
8' | 13.95 | 21.88 | 32.6 | 45.7 | 61.1 | 79.1 | 98.9 | 150.0 | 211 |
8¼' | 14.30 | 22.42 | 33.4 | 46.8 | 62.5 | 80.9 | 101.0 | 153.0 | 215 |
8½' | 14.65 | 22.96 | 34.1 | 47.9 | 63.9 | 82.7 | 103.0 | 156.0 | 219 |
8¾' | 15.00 | 23.50 | 34.9 | 48.9 | 65.3 | 84.4 | 105.0 | 159.0 | 223 |
Diameter off bolt. | ¼' | 5/16' | ⅜' | 7/16' | ½' | 9/16' | ⅝' | ¾' | ⅞' |
Weight of head and nut together per hundred. | 2.83 | 4.48 | 7.53 | 11.71 | 16.61 | 22.82 | 29.4 | 49.7 | 74.5 |
Length in inches under head to point. | Weight of bolts and nuts in pounds per hundred. | ||||||||
9' | 15.34 | 24.05 | 35.7 | 50.0 | 66.7 | 86.2 | 108.0 | 162.0 | 228 |
9¼' | 15.69 | 24.59 | 36.5 | 51.1 | 68.1 | 87.9 | 110.0 | 165.0 | 232 |
9½' | 16.04 | 25.13 | 37.3 | 52.1 | 69.5 | 89.7 | 112.0 | 168.0 | 236 |
9¾' | 1639 | 25.67 | 38.1 | 53.2 | 70.9 | 91.5 | 114.0 | 172.0 | 240 |
10' | 16.73 | 26.22 | 38.9 | 54.3 | 72.3 | 93.2 | 116.0 | 175.0 | 245 |
10¼' | 17.08 | 26.77 | 39.6 | 55.3 | 73.7 | 95.0 | 118.0 | 178.0 | 249 |
10½' | 17.43 | 27.32 | 40.4 | 56.4 | 75.0 | 96.7 | 120.0 | 181.0 | 253 |
10¾' | 17.78 | 27.86 | 41.2 | 57.5 | 76.4 | 98.5 | 123.0 | 184.0 | 258 |
11' | 18.13 | 28.40 | 42.0 | 58.5 | 77.8 | 100.3 | 125.0 | 187.0 | 262 |
11¼' | 18.48 | 28.94 | 42.8 | 59.6 | 79.2 | 102.0 | 127.0 | 190.0 | 266 |
11½' | 18.83 | 29.48 | 435 | 60.7 | 80.6 | 103.8 | 130.0 | 193.0 | 270 |
11¾' | 19.18 | 30.03 | 44.3 | 617 | 82.0 | 105.5 | 132.0 | 197.0 | 275 |
12' | 19.53 | 30.58 | 45.1 | 62.8 | 83.4 | 107.3 | 134.0 | 200.0 | 279 |
13' | 20.92 | 32.75 | 48.3 | 67.1 | 89.0 | 114.4 | 142.0 | 212.0 | 296 |
14' | 22.31 | 34.92 | 51.4 | 71.3 | 94.5 | 121.4 | 151.0 | 225.0 | 313 |
15' | 23.70 | 37.09 | 54.5 | 75.6 | 100.1 | 128.4 | 160.0 | 237.0 | 330 |
16' | 25.09 | 39.26 | 57.6 | 79.8 | 105.7 | 135.5 | 168.0 | 250.0 | 347 |
17' | 26.48 | 41.43 | 60.8 | 84.1 | 111.3 | 142.5 | 177.0 | 262.0 | 364 |
18' | 27.87 | 43.60 | 63.9 | 88.3 | 116.8 | 149.5 | 186.0 | 275.0 | 381 |
19' | • • • | • • . | 67.1 | 92.6 | 122.4 | 156.6 | 194.0 | 287.0 | 398 |
20' | • • • | • . • | 70.2 | 96.8 | 127.9 | 163.6 | 203.0 | 300.0 | 415 |
21' | • • • | • • • | 73.3 | 101.1 | 133.5 | 1706 | 212.0 | 312.0 | 432 |
22' | • • • | • • • | 76.4 | 105.3 | 139.1 | 177.7 | 220.0 | 325.0 | 449 |
23' | • • • | • • • | 79.6 | 109.6 | 144.6 | 184.7 | 229.0 | 337.0 | 466 |
24' | • * • | • • • | 82.7 | 113.9 | 150.2 | 191.8 | 238.0 | 350.0 | 483 |
25' | • • • | • • | • • • | • • • | ... | •• | • ... | 363.0 | 500 |
26' | • • • | • • • | • • • | ... | • • • | • • • | • • • | 375.0 | 517 |
27' | • • • | • • • | • . • | ... | • • • | • • • | • * • | 388.0 | 534 |
28' | • • • | • • • | ... | • • • | • • • | • • • | • • • | 400.0 | 551 |
29' | • • • | • • | ... | ... | • • • | • • | . • • | 413.0 | 568 |
30' | ... | ... | ... | •• . | ... | ... | • • • | 425.0 | 585 |
Table Of The Weight Of Mild Steel Bolts And Nuts In Pounds Per Hundred. Hexagon Heads And Nuts
Hex Bolt Weight Chart
Diameter of bolt. | 1' | 1⅛' | 1¼' | 1⅜' | 1½' | 1⅝' | 1¾' | 1⅞' | 2' |
Weight of head and nut together per hundred. | 106 | 148 | 195 | 251 | 324 | 403 | 495 | 600 | 725 |
Length in inches under head to point. | Weight of bolts and nuts in pounds per hundred. | ||||||||
2' | 149 | 204 | |||||||
2¼' | 155 | 212 | 273 | 347 | |||||
2½' | 161 | 219 | 281 | 357 | 450 | 549 | |||
2¾' | 167 | 226 | 290 | 368 | 462 | 564 | 682 | ||
3' | 173 | 233 | 299 | 378 | 474 | 579 | 699 | 835 | 992 |
3¼' | 178 | 240 | 308 | 389 | 487 | 593 | 716 | 855 | 1014 |
3§' | 184 | 247 | 316 | 400 | 500 | 608 | 733 | 875 | 1036 |
3¾' | 189 | 254 | 325 | 410 | 512 | 623 | 750 | 894 | 1058 |
4' | 195 | 261 | 334 | 420 | 524 | 638 | 768 | 913 | 1081 |
4¼' | 200 | 267 | 342 | 431 | 537 | 653 | 785 | 933 | 1103 |
4½' | 206 | 274 | 351 | 441 | 549 | 667 | 802 | 952 | 1125 |
4¾' | 212 | 281 | 360 | 451 | 562 | 682 | 819 | 972 | 1148 |
5* | 217 | 288 | 368 | 461 | 575 | 697 | 836 | 991 | 1170 |
5¼' | 223 | 296 | 377 | 472 | 588 | 712 | 853 | 1011 | 1192 |
5½' | 228 | 303 | 386 | 483 | 600 | 726 | 870 | 1031 | 1214 |
5¾' | 234 | 310 | 395 | 493 | 612 | 741 | 887 | 1050 | 1236 |
6' | 239 | 317 | 404 | 504 | 624 | 756 | 904 | 1069 | 1259 |
6¼' | 245 | 324 | 412 | 515 | 637 | 771 | 921 | 1089 | 1281 |
6½' | 251 | 331 | 421 | 526 | 650 | 785 | 938 | 1109 | 1304 |
6¾' | 256 | 338 | 429 | 536 | 663 | 800 | 955 | 1129 | 1326 |
7' | 262 | 345 | 438 | 546 | 676 | 815 | 972 | 1148 | 1348 |
7¼' | 267 | 352 | 447 | 557 | 688 | 830 | 989 | 1168 | 1370 |
7½' | 273 | 359 | 455 | 567 | 700 | 844 | 1006 | 1187 | 1393 |
7¾' | 278 | 367 | 464 | 578 | 712 | 859 | 1023 | 1207 | 1415 |
8' | 284 | 373 | 473 | 588 | 724 | 873 | 1040 | 1226 | 1437 |
8¼' | 289 | 380 | 481 | 598 | 737 | 888 | 1057 | 1245 | 1459 |
8½' | 295 | 387 | 490 | 609 | 749 | 903 | 1074 | 1265 | 1482 |
8¾' | 301 | 394 | 499 | 620 | 762 | 918 | 1091 | 1284 | 1504 |
9' | 306 | 401 | 508 | 630 | 774 | 932 | 1108 | 1304 | 1526 |
9¼' | 312 | 408 | 517 | 641 | 787 | 947 | 1125 | 1323 | 1548 |
9½' | 318 | 416 | 525 | 651 | 800 | 962 | 1142 | 1343 | 1571 |
9§' | 323 | 423 | 534 | 662 | 812 | 977 | 1159 | 1363 | 1593 |
10' | 329 | 430 | 542 | 672 | 825 | 991 | 1176 | 1382 | 1615 |
10¼' | 334 | 437 | 551 | 683 | 838 | 1006 | 1193 | 1402 | 1637 |
Diameter of bolt. | 1' | 1⅛' | 1¼' | 1⅜' | 1½' | 1⅝' | 1¾' | 1⅞' | 2' |
Weight of head and nut together per hundred. | 106 | 148 | 195 | 251 | 324 | 403 | 495 | 600 | 725 |
Length in inches under head to point. | Weight of bolts and nuts in pounds per hundred. | ||||||||
10½' | 340 | 444 | 559 | 694 | 850 | 1021 | 1210 | 1421 | 1659 |
10¾' | 345 | 451 | 568 | 704 | 863 | 1035 | 1228 | 1441 | 1681 |
11' | 351 | 458 | 577 | 714 | 875 | 1049 | 1245 | 1460 | 1704 |
11¼' | 356 | 465 | 586 | 725 | 887 | 1064 | 1262 | 1480 | 1726 |
11½' | 362 | 472 | 595 | 736 | 900 | 1079 | 1279 | 1499 | 1748 |
ll¾' | 367 | 479 | 603 | 746 | 913 | 1094 | 1296 | 1519 | 1770 |
12' | 373 | 486 | 612 | 756 | 925 | 1108 | 1313 | 1539 | 1793 |
13' | 395 | 514 | 646 | 799 | 975 | 1168 | 1381 | 1617 | 1882 |
14' | 418 | 542 | 681 | 841 | 1024 | 1227 | 1449 | 1695 | 1971 |
15' | 440 | 570 | 716 | 883 | 1074 | 1285 | 1517 | 1774 | 2060 |
16' | 462 | 598 | 751 | 925 | 1124 | 1343 | 1585 | 1852 | 2149 |
17' | 484 | 627 | 786 | 967 | 1175 | 1403 | 1654 | 1930 | 2238 |
18' | 507 | 655 | 821 | 1008 | 1225 | 1461 | 1722 | 2008 | 2327 |
19' | 529 | 683 | 855 | 1051 | 1274 | 1520 | 1790 | 2087 | 2416 |
20' | 551 | 711 | 890 | 1093 | 1325 | 1578 | 1858 | 2165 | 2505 |
21' | 574 | 739 | 925 | 1135 | 1374 | 1637 | 1926 | 2243 | 2595 |
22' | 596 | 767 | 960 | 1177 | 1425 | 1696 | 1994 | 2321 | 2684 |
23' | 618 | 796 | 995 | 1219 | 1474 | 1754 | 2062 | 2399 | 2773 |
24' | 640 | 824 | 1029 | 1261 | 1525 | 1813 | 2130 | 2477 | 2861 |
25' | 662 | 852 | 1064 | 1303 | 1575 | 1872 | 2198 | 2555 | 2950 |
26' | 684 | 880 | 1098 | 1345 | 1625 | 1931 | 2266 | 2633 | 3039 |
27' | 707 | 908 | 1133 | 1387 | 1675 | 1990 | 2334 | 2711 | 3128 |
28' | 729 | 936 | 1168 | 1429 | 1725 | 2048 | 2402 | 2790 | 3217 |
29' | 751 | 964 | 1202 | 1471 | 1775 | 2107 | 2470 | 2868 | 3306 |
30' | 774 | 993 | 1237 | 1513 | 1826 | 2166 | 2539 | 2947 | 3395 |
Continue to:
- prev: Applications Of Riveted Girderwork In Connection With Water-Tank Construction. Continued
- next: Chapter IV. On The Practical Design Of Columns And Struts